Buying guides
Build a clearer fixing and support material list
Distinguish building anchors from bolts and support connectors, then specify the details and quantities of each.
Identify the substrate and connection detail before requesting fixings. Give thread and length, material or property requirements, finish, fixture dimensions and quantity. Anchor selection and load requirements must follow the project design and the selected product documents.
Identify what is being connected
An anchor into a building substrate is a different purchasing line from a bolt joining two metal parts.
- Name the substrate and provide the fixing or support drawing.
- For anchors, include the specified reference or design requirements and fixture thickness.
Match the components
Keep the thread, contact surfaces and required accessories clear. Do not assume every loose item is supplied as a kit.
- List rod/bolt dimensions, thread pitch, material and finish.
- Identify nuts, washers, channel nuts, plates and clamps required for the connection.
Agree quantities and evidence
Use quantities from the project material list and ask what each quoted pack or set contains.
- Separate pieces, sets and cut lengths; identify the applicable drawing revision.
- State any required product documents, delivery location and required date.
Four fixing enquiries to keep distinct
| Item family | Describe before quoting | Confirm with the project detail |
|---|---|---|
| Mechanical anchor | Substrate, fixture thickness and specified anchor | Embedment, hole and installation requirements |
| Bolt, nut and washer | Thread, length, material/property and finish | Mating parts and the contents of each set |
| Threaded rod and channel connector | Rod/thread, channel section and connection geometry | Matching nuts, plates and cut lengths |
| Nylon plug and screw | Substrate, fixture and matching screw dimensions | The selected product’s intended application |
When the fixings belong to a cable route or support assembly, connect the fixing specification to the route hardware checklist. Record the rods, channels, plates and fittings required by the approved support detail.
Questions about this guide
Is “M10” enough for a fixing quotation?
Add the item type, length and thread details, material or property requirements, finish, quantity and relevant drawing.
Can anchors of the same diameter be treated as having the same capacity?
No capacity should be assumed from diameter alone. Use the project design and the exact product’s documented conditions; this guide provides no load rating.
Can I ask for a quotation without naming a brand?
Yes. Provide the required specification and project documents, and identify who must approve the proposed product or any substitution.
Technical references
- fischer — FAZ II Plus mechanical bolt-anchor dimensions and installation fields ↗
- fischer — DuoPower substrate and screw-matching information ↗
These references explain product construction or planning details. They do not identify KOCO as an authorised dealer or certify a product offered through this catalogue.